Product composition

Neoprene insert

Neoprene
insert

 clamp

Aluminum alloy
clamp body

Schackle

Schackle

Bolt

Bolt, screw nut, split pin, plain washer,
spring washer.

Protection splice

Protection splice

Mounting the neoprene insert

монтаж втулки

Make sure the cable / conductor is clean in the mounting point. Apply the insert to the cable so that the jointing edge is in the horizontal plane.
Fix the insert with tape.

Mounting the protection splice

монтаж протектора

Wind 2-3 turns of the wire over the cable. Make sure the wire touches the narrow middle oint of the insert.

монтаж протектора

Wind the other wires in the same fashion.

монтаж протектора

Complete winding the wire on the both ends.

Mounting aluminum alloy clamp body

монтаж узла крепления

Apply two halves of the body in the middle point of the insert over the wire

монтаж узла крепления

Fix the halves with the shackle with screw, plain washer, spring washer, nut and split pin.

 

Home Installation guides Mounting the suspension set

Address

© SARMAT LLC
430001, Russia, Republic of Mordovia,
Saransk, Stroitelnaya, 3
Tel. / fax.  +7 8342 480928
e-mail: sale@sarmatura.ru